enlarge
STANDARD Roller Crusher with Screener and Feed Hopper
Twin-roller crusher with an electro-vibratory screener for simultaneous crushing and screening of bulk materials.
Description
The STANDARD roller crusher with an electro-vibratory screener and feed hopper is a complete station designed for simultaneous crushing and screening of bulk materials such as coal, glass or slag. The unit was designed for low and medium hourly output, oscillating around 10 t/h. The actual throughput depends on the type of material being crushed and on the relation between the input fraction size and the required output fraction size, which is why every machine is matched to a specific production task.
The heart of the crusher is two counter-rotating crushing rollers mounted in a welded body of thick, solid steel. The diameter and surface structure of the rollers are matched to the material: smooth rollers work well with very fine fractions (squeezing), while toothed or profiled rollers are intended for materials of larger granulation, e.g. coal. The drive consists of two independently working 3-phase 400V electric motors with worm-gear motors (standard 2x 3 kW), and the motor power is matched to the gears used and the drum diameter. Splitting the drive across two rollers ensures stable, continuous operation even with damp material.
The set includes: a material hopper with a capacity of 3 m3 and a load capacity of up to 2 t, a support frame for the crusher, screener and feed hopper, a welded body, two machined crushing drums (standard diameter 275 mm, teeth 15 mm), two worm-gear drives and an electro-vibratory screener with interchangeable screens. The complete 400V electrical installation is equipped with overload and short-circuit motor protection and renowned Italian-made LOVATO automation. The machine has guards for moving parts, an emergency stop switch, forklift transport handles, a nameplate, health-and-safety markings, an EC declaration of conformity and CE marking, as well as an extended and simplified operating manual and a manufacturer's warranty.
The unit crushes the input material and screens it into 3 fractions whose size depends on the screens used - the mesh cross-section is decided by the customer. The machine can crush and screen material at the same time or only screen it, handling both wet and dry material. When processing hard coal, various fraction configurations can be obtained, e.g. fines together with fractions above 8 mm, eco-pea coal, nut or cobble. It is an ideal solution for producing eco-pea coal and for screening out unwanted fines; from pea or nut II grade it makes it possible to obtain eco-pea coal of clearly higher market value.
Many years of experience and the number of units produced allow us to build the crusher to individual requirements. At the customer's request we change the feed-hopper capacity and adapt the machine to various kinds, sizes and types of material. The crusher can also be made from materials approved for food contact and adapted for crushing grain, salt, sugar and other bulk materials characteristic of the food industry.
Frequently asked questions
What does the crusher's actual throughput depend on?
The declared throughput of around 10 t/h is an indicative value. The actual output depends on the type of material, its moisture and the difference between the input fraction size and the required output fraction - the finer the target fraction, the lower the throughput.
Can I match the rollers and screens to my material?
Yes. The structure and diameter of the rollers are matched to the material - smooth for squeezing very fine fractions, toothed for larger granulation such as coal. The screener works on interchangeable screens, and the customer chooses the type and mesh size, deciding the size of the fractions obtained.
Can the machine be made for food materials?
Yes, at the customer's request we build the crusher from materials approved for food contact and adapt it for crushing grain, salt, sugar and other bulk materials of the food industry.
What additional options are available for this crusher?
The set can include, among others, feeding and receiving belt conveyors, a hopper agitator and electro-vibrator for poorly-flowing materials, a BIG-BAG bagging chute with a scale, transport wheels and a food-industry version. We also change the feed-tank capacity.
Enquiry
Enquire about “STANDARD Roller Crusher with Screener and Feed Hopper”
Tell us the material and the throughput you need — we will configure the machine and prepare a quotation.
